- Joined
- Nov 26, 2016
You can just add lines in a post to quotes and then hit the "insert quotes" to avoid quadruple posting (and more).thank you. i am making sure the end of his time here is spent having fun in the best conditions possible!
Why aren't you making a video on Prusa Research and Bondtech's anti-consumer bait and switch? What about their gaslighting?
You made 11 videos crying about Bambu Lab's networking add-on being non-compliant with open source rules.
3D printing is something you know fuck all about, the same applies to open source software.
That's not counting the other videos pertaining to 3D printing where you seethed about Bambu in it.
This is an outright lie, Louis. You are a smart man, you know it's a lie.
None of our Bambu printers are cloud dependent. The machines can operate in LAN only mode. That one time where there was a network outage (zero points for guessing the CISCO employee's ethnicity), we used USB sticks to print.
For the sake of argument, our one Prusa works just fine without any IOT too.
Do you really think lying about a manufacturer benefits companies your side supports like Prusa? Prusa thinks making up shit about his competitors translates to more clout and sales. Look at where his printers are at.
Stagnation. Constantly bashing his competitors only assembled him an army of fuckwit reddit scum that sucks his Czechian penis and a band of dedicated hate-fans who makes fun of him on Twitter.
This article is horrible, it's beyond biased.
https://consumerrights.wiki/w/Prusa_Research | https://archive.md/WvnB6
Why isn't Bondtech's bait and switch mentioned in the controversy section?
You're a busy man but there's no way you didn't hear anything about this massive shitstorm, considering your self-insert regarging Bambu's nasty anti-consumer shit.
https://archive.md/UoLiK
This is what Bondtech and their affiliate Prusa did:
- On their webpages, they advertised the nozzles as "hardened nozzles for abrasive materials".
- Abrasive materials such as carbon fibre or glass fibre doped filaments require special nozzles. Normal nozzles will wear out after a few prints.
- If Bambu did this, we would see another dozen videos of you bashing them.
- Prusa's response:
- Find it here: https://www.reddit.com/r/prusa3d/comments/1vbqkuz/update_regarding_your_indx_order_nozzles_shipping/
- "Bondtech has recently confirmed that the nozzles currently supplied with the INDX system are surface-hardened rather than fully hardened as originally planned, and has not yet finalized the compensation plan for affected customers."
- What is this wordsalad faggotry? All metals undergo a hardening process for fuck's sake. This is the kind of semantics you'd see from a Minnesotan "lawyer", not a reputable (kek) European manufacturer. They're either hardened or they're not. If Bambu did this, you would make a dozen videos calling it gaslighting.
- "After printing 5 kg of PETG-CF on several printers, the nozzles still showed great print quality and little to no wear." -- so what?
- Our cheap Bambu nozzle took 24 reels of PLA-CF before it shat the bed. Who gives a shit about this?
- "We will be sharing specifics about it in the near future (before shipping), and you’ll know it when you see it."
- More gummy bears? Do you think this response is acceptable?
- "Bondtech has recently confirmed that the nozzles currently supplied with the INDX system are surface-hardened rather than fully hardened as originally planned, and has not yet finalized the compensation plan for affected customers."
- This was Bambu's A1 response: https://bambulab.com/en-us/support/A1recall
- Purchasers of affected A1 printers have two options: they can return their A1 for a full refund plus a $80 voucher on our online store or arrange replacement of the heatbed and cable by a trained electronics repair technician plus a $120 voucher on our online store.
- Full refund and $80, or replace the assembly yourself and $120.
- Ask yourself, which response is better and epitomises "Right to Repair" more? The one with "trust me bro" compensations or the one that's providing $120 and a guide on how to replace the thing yourself?
- Find it here: https://www.reddit.com/r/prusa3d/comments/1vbqkuz/update_regarding_your_indx_order_nozzles_shipping/
- Bondtech's response:
- https://www.bondtech.se/2026/07/29/indx-hardened-nozzles-update/?v=8bcc25c96aa5
- "The INDX nozzles (both Founders Edition and the CORE One+ Conversion kits from Prusa) were sold as hardened and abrasive-resistant. They are not, in the way that the description leads you to expect, and we need to set the record straight."
- "They are not by the widely accepted description"... gaslighting shit.
- "If you have already received the INDX or will receive it in the upcoming days, chances are the box may still feature the “hardened” label. This is incorrect and we will ensure that the new boxes are correctly labeled."
- For real? So, they knew the nozzles weren't hardened, yet they had boxes that said they were? Who should I believe? The person now, or the same person from 2 months ago -- despite them claiming they knew.
- "We want the compensation to be fair for you and manageable for us. Offering you a % discount on hardened nozzles without knowing their production costs could be misleading (hardened nozzles will likely be more expensive than standard nozzles)."
- A discount? Bambu offered a full refund and 80 bucks, or a replacement kit and 120 bucks. They're offering a discount to purchase something we already paid for?
- The page advertised hardened steel nozzles. We got standard, coated nozzles. The solution they're offering is "you get a discount once we get our shit together to make these nozzles, we don't know when we'll make them, if ever". I cannot see a single cent discount from the kit or even a damn coupon for Prusa's overpriced filaments.
- "The INDX nozzles (both Founders Edition and the CORE One+ Conversion kits from Prusa) were sold as hardened and abrasive-resistant. They are not, in the way that the description leads you to expect, and we need to set the record straight."
- https://www.bondtech.se/2026/07/29/indx-hardened-nozzles-update/?v=8bcc25c96aa5
Do you think this is acceptable? Do you think companies like these are true Bambu Lab competitors?
You don't realise the kind of sway and power you have accumulated, do you? Staying silent when you made a dozen videos shitting on Bambu is an act of killing with kindness.
God save Western manufacturing.