Essential functions condensed

Compact
USB cable checker.

Type-C / Micro-B cableSpecialized for checking conductivity and power supply capabilities..
You can smartly check the capacity of the plugged-in cable with an LED.

What is USB Cable Checker Lite?

The "USB Cable Checker Lite" (ADUSBCIMLE) was created as a model that inherited the concept of the USB CableChecker2.
This tool condenses only the essential functions needed to make USB cable diagnostics more convenient.
Compared to the previous UCC2 product, the performance remains almost the same, but the volume has been reduced by 20%.

It supports checking wire connections, power line resistance, and CC/Vconn resistance, and for Type-C to Type-C cables, it can also verify USB PD power delivery capability up to 240W from eMarker information.

Main changes from UCC2

• 20% more compact in volume (approx. 76 x 52 x 15 mm / approx. 40 g)
• The USB PD power delivery capability is displayed. Up to 240W (EPR)Supported
• The power source is standardized to a CR2032 coin cell battery (a test battery is included).
• The display method is specialized in LED indicators (simple and intuitive).

What you can do with USB Cable Checker Lite

Wire continuity check

VBUS, GND, CC, SBU, D+/D-, TX1/RX1, TX2/RX2, etc., the wires inside the cableContinuity and disconnection can be checked with an LED.Available
The cable type is automatically determined from the LED lighting pattern.

Measurement of power line resistance

The resistance value between VBUS and GND is displayed on an LED scale.
CableQuality and deterioration statusYou can easily determine this.
This is ideal for sorting through cables that you feel are charging slowly.

CC/Vconn resistance display

The CC pull-up/pull-down resistors of the Type-C cable are directly displayed on a dedicated LED panel.

Checking the maximum USB PD power delivery capability

The eMarker chip embedded in the Type-C to Type-C cable is read, 60W/100W/240W The LED lights up according to the wattage.
You can instantly identify cables compatible with high-power devices such as laptops.

Compatible with various cables

• USB-A – Micro-B (USB 2.0)
• Type-C – Micro-B
• USB-A – Type-C (USB 3.x)
• Type-C – Type-C (USB 2.0 / USB 3.x / Fully wired)

* While it is possible to check the physical connection of USB4 and Thunderbolt cables, it is not possible to identify the standard or communication speed.

Recommended for the following people!

• For gadget enthusiasts who own multiple USB cables
• For audiophiles who want to compare and test cables from various manufacturers.
• For those who want to check the reliability of cables used in their work beforehand.
• I don't need the detailed features of UCC3.For those who want to easily check only the cables

Q & A

Q: What is required for it to work?

A: It operates on one CR2032 coin cell battery. A battery for testing is included.

Q: Can I use a USB 4/Thunderbolt cable?

A: While it is possible to verify the physical wiring, it is not possible to identify the standard or communication speed.

Q: Does it have a port checking function?

A: This product is specialized for cable checking and does not include port checking functions such as checking the USB port's Power role, obtaining PDOs, or checking Alternate Mode. If you require these functions, please contact us.USB Cable Checker 3Please consider ".

Q: Is a USB cable included?

A: It is not included. Please use your own USB cable.

Q: Can I use it even if I don't have any knowledge of electronics?

A: To use this product, you need a general understanding of electronics and electronic circuits. Since the measurement is read from the LED lighting pattern, please use it with some understanding of the meaning of the numerical values.

Specification.

Usage precautions

• Using this product requires general knowledge of electronics and electronic circuits.
• This product does not include a USB cable.
• This device requires one CR2032 coin cell battery to operate. (A test battery is included.)
• This device does not have a USB port check function.