[GUIDE] How to root Android Pie build (Temporarily Guide)

hikari_calyx · Dec 19, 2018

Since TWRP is unbootable under this build, you have to use patched boot trick to root this phone.
However, only Magisk 17.1 is usable on this build, Magisk 17.2 - 18.0 can't be installed properly.

So I made a custom update channel that fixed to Magisk 17.1 to assist me.

This guide requires unlocked bootloader - still, I won't introduce how to unlock it here, please Google for it.

Here's how to root:

1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)

2. Copy this boot.img to Download directory.

3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.

4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:

Code:

https://dwz.cn/5I3anBD4

5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.

6. Copy patched_boot.img from the Download directory of internal storage to PC.

7. Reboot your phone to fastboot mode and execute following commands:

Code:

.\fastboot reboot-bootloader
.\fastboot boot D:\patched_boot.img

8. Open Magisk Manager, reinstall Magisk 17.1 directly.

9. Reboot your phone and all done.

Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.

Hope TWRP can be compiled for D1C-6120.

taicracker · Dec 19, 2018

If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.

hikari_calyx · Dec 19, 2018

taicracker said:
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.

OK, thanks for the info.

taicracker · Dec 19, 2018

hikari_calyx said:
OK, thanks for the info.

I hope you can build TWRP for Android P variant of Chinese and it works on non-unlockbootloader. Like you used to do with Oreo? .Thanks

thirumalpalwai · Feb 16, 2019

This did not work with TA-1021 while i have pi installed with twrp and patched boot with magisk 16.1 but it do not work not even root access just keep recovery unchanged(twrp).
It says deviceid locked ple if i patch boot with 17.1 what to do! google pay and banking apps dont work.

vineet09i · Feb 17, 2019

hikari_calyx said:
OK, thanks for the info.

Can we use official TWRP recovery (3.2.3 made for PLE)
On pie 612H CN - OF YOUR HOMEBREW
and also on 612H ww ??
Please tell

---------- Post added at 06:12 AM ---------- Previous post was at 06:05 AM ----------

taicracker said:
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.

Can we install this TWRP recovery on Chinese firmware (or ww firmware of ta-1003)or it can be flashed only on PLE versions

vineet09i · Feb 17, 2019

hikari_calyx said:
OK, thanks for the info.

Can I install D1C-612H-WW over 612H-CN using OST ??
OST show that the image is broken

vineet09i · Feb 17, 2019

hikari_calyx said:
Here's how to root:

1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)

2. Copy this boot.img to Download directory.

3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.

4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:

Code:

https://dwz.cn/5I3anBD4

5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.

6. Copy patched_boot.img from the Download directory of internal storage to PC.

7. Reboot your phone to fastboot mode and execute following commands:

Code:

.\fastboot reboot-bootloader .\fastboot boot D:\patched_boot.img

8. Open Magisk Manager, reinstall Magisk 17.1 directly.

9. Reboot your phone and all done.

Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.

Hope TWRP can be compiled for D1C-6120.

On rebooting Android root gone????

2909luboy · Feb 18, 2019

dont work for me

edit: worsk now over ND1-612C-0-00WW , but for firm official for n5 (612h-0-00WW ) not works, ist patched the xploit for magisk 17 and up

thirumalpalwai · Feb 19, 2019

hikari_calyx said:
Here's how to root:

1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware.
9. Reboot your phone and all done.

Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.

Hope TWRP can be compiled for D1C-6120.

Please help I have working 1003 ww pi installed on Ta-1021 and initially rooted using Chinese twrp with magisk later I tried to install update of twrp recovery got crashed and could not enter recovery tried to flash with Qualcomm tools can enter into Edl phone detected but frimware files doesn't flash some errors. Now result is I can operate my phone magisk 16.1 installed but useless. Banking apps don't work. Factory reset don't work. *#*#874#*#* says file not found (may be because I don't have recovery). Ost la as usual don't work. Please help!

Emmykay223 · Feb 21, 2019

Please help me i am on oreo version .. and i have flashed twrp recovery on my nokia 6 (TA - 1021) ..
THE Problem is when i reboot to recovery it's not booting in twrp but it's booting on custome recovery ..
I need pc everytime , if i want to boot it on twrp .
I have to run command every time to boot in on twrp recovery ..
Is there any way to directly boot it on twrp recovery not in custom recovery ? Please help me

evilracer123 · Feb 21, 2019

@hikari_calyx Does fastboot boot work for you on pie? For me, it does not. Almost shat my pants thinking my TWRP doesn't work but it does in fact work, just fastboot booting it does not work.

self_slaughter · Feb 24, 2019

Finally got the official pie update on my TA-1033. (unlocked bootloader)

The standard versions of TWRP 3.2.3.0 / Magisk 17.3 / Magisk Manager 6.0.1 worked perfectly.

As above, "fastboot boot" doesn't work, but "fastboot flash" etc. does.

Happy days.

Emmykay223 · Feb 25, 2019

Not working for me please can you tell the procedure step by step as i tried your steps but didn't happen anything please

---------- Post added at 06:29 PM ---------- Previous post was at 06:26 PM ----------

taicracker said:
If you have already unlocked the bootloader then just flash the official TWRP for Nokia 6 and flash the Magisk v17.1 or 17.3 via TWRP normally. And TWRP 3.2.3.0 works well on Android P. I tested it and it works fine.

Not working i have unlocked bootloader but i tried to flash twrp and it's not booting on it any other solution please let me know .

Emmykay223 · Mar 1, 2019

Can you help me please my device is showing me this on my recovery , what's an issue please reply as soon as possible i can't even apply update through sd card or adb it's not detecting everytime it entered to this menu .. please help me

vineet09i · Mar 4, 2019

hikari_calyx said:
Here's how to root:

1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)

2. Copy this boot.img to Download directory.

3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.

4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:

Code:

https://dwz.cn/5I3anBD4

5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.

6. Copy patched_boot.img from the Download directory of internal storage to PC.

7. Reboot your phone to fastboot mode and execute following commands:

Code:

.\fastboot reboot-bootloader .\fastboot boot D:\patched_boot.img

8. Open Magisk Manager, reinstall Magisk 17.1 directly.

9. Reboot your phone and all done.

Is this procedure familiar? Yes, it's the same method used on Nokia 7 Plus. But I wrote this guide to tell you few details that you need to notice.

Hope TWRP can be compiled for D1C-6120.

You gave wrong code for booting patched boot.img

It should be as
FASTBOOT FLASH BOOT PATCED_BOOT.IMG

It will permanently root the android pie
You gave the FASTBOOT code only for booting

Emmykay223 · Mar 4, 2019

vineet09i said:
Here's how to root:

1. Extract the D1C-0-6120-00CN-boot.img from my homebrew firmware written in previous guide, or extract the boot.img from the OTA package.
(Later versions will also provide the patched boot image)

2. Copy this boot.img to Download directory.

3. Install latest Magisk Manager from https://github.com/topjohnwu/Magisk/releases
Remember to allow all the permission after installed.

4. Choose "Left Hamburger Menu" - "Settings" - "Update Channel" - "Custom", and type following URL:

5. Back to Magisk Manager main interface, refresh it and check if latest version changed to 17.1.
Tap "Install" - "Install" - "Patch Boot Image", "Left Hamburger Menu" - "Download" - the boot img you copied.
And wait for the patching procedure complete.

6. Copy patched_boot.img from the Download directory of internal storage to PC.

7. Reboot your phone to fastboot mode and execute following commands:

You gave wrong code for booting patched boot.img

It should be as
FASTBOOT FLASH BOOT PATCED_BOOT.IMG

It will permanently root the android pie
You gave the FASTBOOT code only for booting

Hey can i use patched boot image on my official update of pie or which version is able to use of magisk?

vineet09i · Mar 4, 2019

Emmykay223 said:
Hey can i use patched boot image on my official update of pie or which version is able to use of magisk?

You can use the same procedure as hilarious calyx have said in the post
But the FASTBOOT command should be as
FASTBOOT flash boot patched_boot.img
It will permanently root your android
Magisk 17.1 is working
Or you can also flash official twrp available at twrp website and from there you can directly flash magisk 17.1 zip

Emmykay223 · Mar 4, 2019

vineet09i said:
You can use the same procedure as hilarious calyx have said in the post
But the FASTBOOT command should be as
FASTBOOT flash boot patched_boot.img
It will permanently root your android
Magisk 17.1 is working
Or you can also flash official twrp available at twrp website and from there you can directly flash magisk 17.1 zip

Yes but twrp is not booting on my pie build because it is showing "failed to find device for partition system" and i am unable to apply update through sd card or through adb i don't know why so i am thinking to follow this steps hope it will work.

Emmykay223 · Mar 7, 2019

vineet09i said:
You can use the same procedure as hilarious calyx have said in the post
But the FASTBOOT command should be as
FASTBOOT flash boot patched_boot.img
It will permanently root your android
Magisk 17.1 is working
Or you can also flash official twrp available at twrp website and from there you can directly flash magisk 17.1 zip

Why any module is not installing by magisk it's showing me unable to extract, i followed each and every steps as mentioned above and rooted my Nokia 6 again but it's not installing any module what's the reason behind it?

[GUIDE] How to root Android Pie build (Temporarily Guide)

Senior Member

Senior Member

Senior Member

Senior Member

New member

Senior Member

Senior Member

Senior Member

Senior Member

New member

Account currently disabled

Senior Member

Senior Member

Account currently disabled

Account currently disabled

Attachments

Senior Member

Account currently disabled

Senior Member

Account currently disabled

Account currently disabled

Similar threads

Top Liked Posts