(cache)Portal Cube Stand - Steam Controller - Free 3D Print Model

Search models, users, collections, and posts

Martin

Household>Other House Models

IP Report

Print Profile(1)

All

P1S

X1E

H2D

A1 mini

X1 Carbon

H2D Pro

P2S

H2S

X2D

H2C

P1P

Portal Cube Stand - Steam Controller

Designer

3.5 h

3 plates

Open in Bambu Handy

Boost

Released 17 hours ago

Description

Get ready for the steam controller 2 with this Portal Companion Cube stand, the perfect accessory for your controller!

This model is designed to be easy to assemble and uses around 120g of filament. The assembled cube is 70 x 70 x 70mm.

Print Instructions

No supports are required.

An AMS is required to print the heart on the circles, but these are done flat so require minimal layer changes. If you want a non-AMS version, please ask in the comments.

You will need to print the following parts:

1x Cube - Grey

2x Front Circles - White / Red

2x Side Circles - White / Red

4x Bottom Corners - White

4x Top Corners (FL = front left, FR = front right, BL = back left, BR = back right) - White

10x Middle Edges - White

Assembly Instructions

Note: All the parts should push-fit together, however you can use super glue too if they're loose.

Make sure you assemble it before gluing to make sure you get the corners correct!

1. Print the parts

2. Push in the circles in each side.

3. Turn the cube upside-down and insert the 4 bottom corners, with the side that was on the build plate on the bottom side.

(Note: Do not use the corners that have text on them)

4. Rotate the cube so the front is facing you. Insert the 4 top corners matching the letters to the arrow.

(Note: The side that was on the bed should face upwards)

(FL = Front Left, FR = Front Right, BL = Back Left, BR = Back Right).

5. Insert the 10 middle edges.

6. Boost this model

Boost Me (for free)

The cake is a lie.

Boost

Any Issues

Please comment or DM me any issues you have. This model in early access as it was designed before my controller arrived and I 3D printed one. I'll replace the photos and adjust the model if needs be when it arrives but I'm confident it'll work as expected.

Updates

08/05/2026 - Middle edges were the wrong scale on print profile, now fixed.

07/05/2026 - Initial release

Future Development

I'm making a version of this which holds the puck! it'll replace the back middle edge, so don't glue that in if you want the puck holder.
I'll release a phone holder version of this soon.
I'll make just the plain cube so you can have desk toys.
Yes, I'll make an Xbox & PS5 version soon…

Commercial Use

If you wish to sell this model commercially, drop me a DM.

Comment & Rating (10)

@Filu

I sadly don't have an AMS yet, so I'm really happy for the upcoming single-color version. Great work by the way, looks awesome! 👍

(Edited)

4 hours agoThe designer has replied

@ThatRobotGuy

What would you prefer; Adding a pause into the print and changing the colour, or multiple parts you glue together?

3 hours ago

@Filu

Replying to @ThatRobotGuy :

Thing is I don't own a Bambulab machine at the moment, so a manual color swap would be difficult. (Centauri Carbon) So I would personally prefer gluing them together, to be honest 😅 But as to not make it more difficult for others, a release for both possibilities would be awesome. Thank you for your fantastic work and engagement! :)

2 hours ago

@user_2058875136

Replying to @Filu :

I too would prefer a non-colour swap that I could glue together

23 minutes ago

@user_3473594384

Any chance you could make one for the steam deck?

5 hours agoThe designer has replied

@ThatRobotGuy

ill add it to my list! if i can find a 3d model of it should be quite easy

1 hour ago

@franvillasil

Wow, this is awesome!! if you will add support for magnetic puck will be perfect for me!

6 hours agoThe designer has replied

@ThatRobotGuy

i will add it when my controller arrives so I can get a better fit

5 hours ago

@user_2058875136

This is fantastic, any possibility of a non-ams version?

16 hours agoThe designer has replied

@ThatRobotGuy

Yeah sure, I'll do a non-AMS version this weekend. You'll have to swap the colour twice on the heart part for the straight red lines, and for the heart icon, but should be pretty easy. I'll add instructions

16 hours ago

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.